Axial insertion
Panasonic AVK3 / AV131 / AV132
Review another axial insertion equipment route for line comparison.
RHS2B / Through-Hole Insertion
RHS2B Panasonic Axial Insertion Machine For Through-Hole Production Lines
Read the PCB range, insertion speed, component pitch, utilities, and line role before planning a new assembly step. Review this panasonic axial insertion machine and speak with an axial insertion machine supplier about the exact board, component, and production requirements.
0.17 s/component maximum speed | 80 component inputs | 3-phase AC200V | 0.5MPa pneumatic source
Specification Boundary
Turn the visible numbers into project questions
These figures define practical starting boundaries. They do not replace a full component, PCB, tooling, utility, or line-capacity review.
PCB dimensionsL50mm x W50mm to L508mm x W381mm
Maximum speed0.17 s/component
Component inputs80 inputs
Applicable pitch2.5/5.0mm, 7.5mm, and 10mm option
Electrical source3-phase AC200V, 3.5kVA
Pneumatic source0.5MPa, 80L/min (A.N.R)
Machine dimensionsW3000mm x D2280mm x H1560mm
Mass2300kg
Lead Chuck And Component Path
Control the leads before the board receives them
A lead chuck system points to the part of the insertion mechanism concerned with controlled lead handling. That helps explain the machine's role without inventing a jaw design, actuator sequence, sensor layout, or internal drawing.
01
Orient
Bring the leaded component into a usable relationship with the insertion path.
02
Hold
Keep the leads controlled during movement so the path remains stable.
03
Enter
Align the lead path with the PCB holes before later soldering operations.
Through-Hole Line Position
Insertion is one stage in a continuous assembly sequence
RHS2B belongs in the through-hole portion of electronics manufacturing. The machine places leaded components; soldering and inspection still complete the downstream process.
1 / InsertPlace the component leads into the board holes with controlled machine motion.
2 / SolderFix the lead and plated-hole connection in the next process step.
3 / InspectCheck the assembled board after insertion and soldering have done their separate jobs.
Utilities And Installation
Machine size is part of the production decision
Electrical supply, pneumatic demand, footprint, mass, access, and downstream line alignment should be reviewed together before an equipment project is approved.
Confirm on the factory side
- Available 3-phase AC200V, 3.5kVA supply
- 0.5MPa compressed-air source at the stated demand
- W3000mm x D2280mm x H1560mm machine footprint
- 2300kg handling, floor, and access conditions
- PCB transfer, feeder, tooling, and line-clearance needs
Confirm on the process side
Share the PCB outline, panelization, component family, pitch, lead form, insertion sequence, soldering method, inspection step, target line rhythm, and required companion equipment.
The maximum speed is a machine reference, not a promise of finished-line throughput.
Related Line Equipment
Place RHS2B alongside the equipment it may work with
Open each exact detail page to compare the machine role. These links represent adjacent line equipment, not automatic proof of a complete turnkey line.
Technical Reading
Three ways to prepare the next machine discussion
Use the guides below to connect the numbers, mechanism, and line sequence before sending a detailed project request.
Article 01
Read the specification guideRHS2B specifications and utilities
Read PCB size, speed, pitch, inputs, power, air, dimensions, and mass as boundaries that still need project-specific confirmation.
Article 02
Read the mechanism guideLead chuck system basics
Understand the lead-control role behind automated insertion without assuming a complete internal mechanism specification.
Article 03
Read the line-process guideThrough-hole assembly line sequence
Keep insertion, soldering, and inspection connected as separate stages of the electronics production process.
FAQ
Six checks for an RHS2B insertion project
What PCB range does RHS2B support?
RHS2B covers L50mm x W50mm to L508mm x W381mm. Confirm thickness, panelization, tooling, and board handling separately.
What speed and input count does RHS2B offer?
RHS2B is specified at a maximum speed of 0.17 s/component with 80 component inputs. Finished-line output depends on the full process and component plan.
Which pitch options are available?
The available pitch options are 2.5/5.0mm, 7.5mm, and a 10mm option. Confirm the exact component family and lead form for the project.
What does the lead chuck system do?
It refers to controlled lead handling during the insertion path, helping keep component leads aligned before they enter the PCB holes.
What utilities and footprint should be planned?
Plan for 3-phase AC200V, 3.5kVA, a 0.5MPa pneumatic source at 80L/min (A.N.R), and a W3000mm x D2280mm x H1560mm machine footprint.
Does insertion complete the through-hole process?
No. Insertion places the leads; soldering and inspection remain separate downstream steps in the through-hole assembly sequence.
